Welcome to another Aklweb host tutorial. Here, you'll learn how to install and run a SAMP server. This guide was written for CentOS 6.
Prerequisites
You will need "screen" to keep the server running when you exit your SSH client (such as PuTTY). Installing "screen" is simple and only requires you to perform one command.
yum install -y screen
Installing The Server Software
Create a new directory and retrieve the SA-MP software. The "wget" below uses the latest version from the time this article was posted. You may visit the official site to check for newer releases.
cd /
mkdir samp-server
wget http://team.sa-mp.com/files/samp03dsvr_R2.tar.gz
Extract the "tar" file.
tar -zxf samp037svr_R2.tar.gz
Enter the "samp03" folder and edit the configuration file. Make any configuration changes that you would like during this step.
cd samp03
vi server.cfg
Running the server
This is the easy part. First, we must open up a "screen" session. You can change "server" to any name you'd like for easier access back to the "screen" session.
screen -S server
Start the SA-MP server.
./samp03svr
At this point, the server is running. You may leave it running and detach from your screen session by pressing Ctrl+A, then D.
If you require access to the server console again, you can return to the screen with the following command. Update the "server" string if you changed it earlier.
screen -r server
Congratulations! You have installed and started an SA-MP server.
